簡體中文
English
高壓液壓輸送膠管、替代100R1高壓、彎曲半徑較小 SKSR17
Hydraulic Hose: Braid Hose
SKSR17
液壓管:鋼絲編織膠管
應用:適用于高壓液壓輸送場合以及替代100R1高壓并且彎曲半徑較小的工況場合。
結構:
內膠：丁腈橡膠
增強層：一層高強度編織鋼絲（膠管尺寸1/4"，5/16"，3/8"和1/2"）和兩層高強度編織鋼絲（膠管尺寸5/8"，3/4"和1"）
外膠: 黑色氯丁橡膠
標準：SAE J517 R17,ISO 11237 R17 可定制美國MSHA認證
溫度：-40℃～100℃
APPLICATION:It is suitable for high pressure hydraulic conveying and replacing 100R1 high pressure and small bending radius working conditions.
CONSTRUCTION:
Tube：Nitrile rubber
Reinforcement：One storey strength braided steel wire (hose sizes 1/4", 5/16", 3/8" and 1/2")Two storey strength braided steel wire (hose sizes 5/8", 3/4" and 1")
COVER:Black neoprene
Standards: SAE J517 R17,ISO 11237 R17 US MSHA Certification
TEMPERATURE: -40°C to 100°C
內徑 Inside diameter I.D(mm) | 外層鋼絲直徑 | 蓋膠厚度 | 外徑 Outside diameter O.D（mm） | 最大工作壓力MAX.Work pressure W.P(bar) | 最小爆破壓力MIN.Burst pressure B.P | 彎曲半徑 Bending radius （mm） | 重量 weight （kg/m） | |||||||
最小 | 最大 | 最大 | 最小 | 最大 | 最大 | |||||||||
Dash | mm | in | mm | mm | mm | mm | mm | mm | Mpa | psi | Mpa | psi | mm | kg/m |
-3 | 5.0 | 3/16" | 4.6 | 5.4 | 10.1 | 0.8 | 1.5 | 11.6 | 22.4 | 3250 | 89.6 | 13000 | 45 | 0.16 |
-4 | 6.3 | 1/4" | 6.2 | 7.0 | 11.0 | 0.8 | 1.5 | 13.2 | 22.4 | 3250 | 89.6 | 13000 | 50 | 0.20 |
-5 | 8.0 | 5/16" | 7.7 | 8.5 | 13.0 | 0.8 | 1.5 | 15.0 | 22.4 | 3250 | 89.6 | 13000 | 55 | 0.23 |
-6 | 10.0 | 3/8" | 9.3 | 10.3 | 15.0 | 0.8 | 1.5 | 17.0 | 22.4 | 3250 | 89.6 | 13000 | 65 | 0.29 |
-8 | 12.5 | 1/2" | 12.3 | 13.5 | 18.8 | 0.8 | 1.5 | 21.1 | 22.4 | 3250 | 89.6 | 13000 | 90 | 0.38 |
-10 | 16.0 | 5/8" | 15.5 | 16.7 | 23.6 | 0.8 | 1.5 | 25.9 | 22.4 | 3250 | 89.6 | 13000 | 100 | 0.64 |
-12 | 19.0 | 3/4" | 18.6 | 19.8 | 27.7 | 0.8 | 1.5 | 30.3 | 22.4 | 3250 | 89.6 | 13000 | 120 | 0.80 |
-16 | 25.0 | 1" | 25.0 | 26.4 | 35.6 | 0.8 | 2.2 | 38.6 | 22.4 | 3250 | 89.6 | 13000 | 150 | 1.28 |
思科美瑞
SCOMERA
